End mills for smallest bores:

End mills with three or four cutting edges for milling applications in bores starting at Ø 0.75 mm.

• Groove milling
• Full radius groove milling
• Thread milling (metric ISO thread, UNC/UNF thread, Whitworth pipe thread BSP)
• Chamfering
• Keyway milling (DIN6888)

Dovetail milling:

Dovetail milling cutters according to DIN 1833 of type C or type D with shanks according to DIN 6535 HA and DIN 6535 HB.

With cutting widths of 3.0 mm - 10.0 mm for 45° angle milling or with cutting widths of 5.0 - 10.0 for 60° angle milling.

.

Keyway and slot milling:

End mills according to DIN 850 D/F for keyway milling according to DIN 6888 or for slot milling. Staggered teeth.

Available with shanks according to DIN 6535 HA and DIN 6535 HB.

At one glance:

• End mills with cutting diameters from 4.5 mm to 45.5 mm
• cutting edge widths from 1.0 mm to 10.0 mm
• milling depths from 1.0 mm to 14.3 mm 
• coating selection optimally adapted to ISO material groups

T-slot milling:

Solid carbide T-slot milling cutter according to DIN 851 for the production of T-slots following DIN 650, but with corner chamfers and with cross-toothed cutting edges. Available with finishing profile (type N) as well as with roughing profile (type NF). Shanks according to DIN 6535 HA and DIN 6535 HB.

At one glance:

• Solid carbide T-slot milling cutter according to DIN 851 for diameters from Ø 12.5 mm to Ø 32.0 mm
• Milling depths 3.5 mm to 8.0 mm
• Monoblock design for maximum stability
• High feed rates to reduce main times

.

HPC milling :

HPC milling cutter for roughing and finishing operations. These high-quality milling tools allow universal application possibilities thanks to a high-performance geometry as well as low-vibration, smooth-running machining thanks to the unequal division of the cutting edges. Available with cutting diameters starting at ØDC = 3,0 mm up to ØDC = 20,0 mm and with shanks according to DIN 6535 HA or DIN 6535 HB.

At one glance:

• HPC milling cutter for roughing and finishing operations
• ØDC from 3,0 mm up to 20,0 mm
• unequal division of cutting edges
• universal application possibilities thanks to high-performance geometry
• shanks according to DIN 6535 HA or DIN 6535 HB

Disc milling cutters for general groove milling:

In the standard range, Kaestner-Tools offers solid carbide or HSS disc milling cutters (see DIN 885-A) for general groove milling, which can also be used as set milling cutters.

These disc milling cutters with cutting circle diameters from Ø 40.0 mm - 100.00 mm (solid carbide) or Ø 63.0 mm - 100.00 mm (HSS) can be used, if tool diameter and number of teeth are equal, in a coupled way in order to cost-efficiently manufacture intermediate widths.

.

End mill solutions: 

• Shanked cutters and shank-type form cutters
• Lollipop end mills
• Torus cutters
• Corner rounding cutter

Versions

• with cylindrical shank
• with morse taper shank
• with steep taper shank
• for finishing
• for roughing
• roughing & finishing

Disc milling cutter:

• Form cutters
  • backed off
  • relief-ground
• Coupled sets of form cutters
• Groove cutters
• Gear cutters

• Shell end mills
• Angular milling cutter
• Double angle cutter
• Convex/concave milling cutters
• Corner rounding cutters